are system solutions designed for the home and for industry
GARDIA gate and wicket are system solutions designed for the home and for industry. Main posts and a set of LOCINOX hinges and lock are supplied with a gate or wicket. Corrosion protected by hop-dip galvanising or Duplex system: hot-dip galvanising + polyester coating.
GARDIA gates and wickets are a good choice for all types of private, public and industrial areas. Gates can be installed to enclose premises, gardens, parks, schools, kindergartens, stores, etc..
Gate and wicket leaf are filled in with Vega 2D mesh panel with wire diameter 6/5/6 or Vega 2D Super 8/6/8.
Welded mesh panel welded to the frame.
Gates and wickets with main posts, Vega 2D or Vega 2D Super panel infill welded to the frame, represent solid and durable construction.
Reliable LOCINOX hinges allow for 180° opening angle. The hinges offer extensive adjustability.
With the reversible construction, gates and wickets ensure any possible opening direction. To achieve the required swing direction, it is enough to correspondingly install the posts, and then, if needed, reverse the symmetrical strike and latch bolt.
Gates and wickets are hot-dip galvanised or hot-dip galvanised and polyester coated for corrosion protection.
WIŚNIOWSKI fences are system solutions. We offer modern steel fences, section-infill fences and welded wire mesh fences for the home and for industry. Our fences provide durability and high quality combined with elegance and style. WIŚNIOWSKI complex solutions give you a peace of mind especially when you need to enclose your property and ensure it is safe and visually appealing. WIŚNIOWSKI fences are good choice both for private properties and industrial areas. Take advantage of the whole offer and create your unique fencing.
System fence with GARDIA double-leaf gate and wicket filled with Vega 2D welded mesh panel
System fence with GARDIA double-leaf gate and wicket filled with Vega 2D Super welded mesh panel
Combining hot-dip galvanising with powder coating in DUPLEX® system ensures the extended durability of WIŚNIOWSKI fencing. Despite the weather conditions, we have a lasting peace of mind that WIŚNIOWSKI fencing will be visually appealing.
The gates are available in hot-dip galvanised, or galvanised and polyester coated version. The gates are available, as standard, in the colours as follows:
RAL 6005 MAT, RAL 7016 MAT.
The design of gate or wicket frame depends on its dimensions and can be made of 60x40 or 80x40 mm sections. The leaf is equipped with reversible lock and, in double-leaf gates, LOCINOX drop bolt. On side of the leaves LOCINOX hinge brackets are welded.
Posts of gates and wickets constitute an integral part of the product. Posts have been designed to meet the strength requirements of the whole construction. Posts are topped with caps type pyramid. To manufacture the posts, the following sections has been selected: 80x80, 100x100, 120x120 and 160x160 mm.
| DIMENSIONS OF GATE AND WICKET POST | ||
| A | Gate width So [mm] | Wicket width So [mm] |
| Post made of 80x80 mm section | 2000 - 2500 | 1000 - 1250 |
| Post made of 100x100 mm section | 3000 - 4000 | 1500 - 2000 |
| Post made of 120x120 mm section | 4500 - 5500 | - |
| Post made of 160x160 mm section | 6000 - 8000 | - |
EN | English 
PL | Polski 
CZ | Čeština 
DE | Deutsch 
FR | Français 
NL | Dutch (Belgium) 
IT | Italiano 
RU | Русский 
UA | Українська 
LT | Lietuvių 
SE | Svenska 
DK | Dansk 
NO | Norsk 
FI | Suomi 
HU | Magyar 
